 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MRS1504T3/D Advance Information Surface Mount Standard Recovery Power Rectifier SMB Power Surface Mount Package Features mesa epitaxial construction with glass passivation. Ideally suited for high frequency switching power supplies; free wheeling diodes and polarity protection diodes. * Compact Package with J-Bend Leads Ideal for Automated Handling * Stable, High Temperature, Glass Passivated Junction Mechanical Characteristics: * Case: Molded Epoxy * Epoxy Meets UL94, VO at 1/8 * Weight: 95 mg (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable * Maximum Temperature of 260C / 10 Seconds for Soldering * Available in 12 mm Tape, 2500 Units per 13 inch Reel, Add "T3" Suffix to Part Number * Polarity: Notch in Plastic Body Indicates Cathode Lead * Marking: RGG MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (At Rated VR, TI = 118C) Peak Repetitive Forward Current (At Rated VR, Square Wave, 20 kHz, TI = 118C) Non-Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) Storage / Operating Case Temperature Operating Junction Temperature Symbol VRRM VRWM VR IO IFRM IFSM Tstg, TC TJ MRS1504T3 STANDARD RECOVERY RECTIFIER 1.5 AMPERES 400 VOLTS CASE 403A-03 SMB Value 400 Unit V 1.5 3.0 50 -55 to 150 -55 to 150 A A A C C THERMAL CHARACTERISTICS Thermal Resistance - Junction-to-Lead (2) Thermal Resistance - Junction-to-Ambient (on 1 sq. Cu. PCB pattern) Rtjl Rtja 18 79 C/W ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (1), see Figure 2 (IF = 1.5 A) (IF = 2.25 A) Maximum Instantaneous Reverse Current, see Figure 4 (VR = 400 V) (VR = 200 V) (1) Pulse Test: Pulse Width 250 s, Duty Cycle 2.0%. (2) Minimum pad size IR VF TJ = 25C 1.04 1.10 TJ = 25C 1.0 0.5 TJ = 100C 0.96 1.02 TJ = 100C 340 180 V mA This document contains information on a new product. Specifications and information herein are subject to change without notice. REV 1 (c)RectifierInc. 1997 Data Motorola, Device 1 MRS1504T3 IF, INSTANTANEOUS FORWARD CURRENT (AMPS) 100 IF, INSTANTANEOUS FORWARD CURRENT (AMPS) 100 100 10 TJ = 100C 1.0 TJ = 150C TJ = 25C TJ = -40C 0.1 0.6 0.8 1.0 1.2 1.4 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 10 TJ = 100C 1.0 TJ = 150C TJ = 25C 0.1 0.6 0.8 1.0 1.2 1.4 1.6 VF, MAXIMUM INSTANTANEOUS FORWARD VOLTAGE (VOLTS) Figure 1. Typical Forward Voltage Figure 2. Maximum Forward Voltage 100E-6 I R, MAXIMUM REVERSE CURRENT (AMPS) I R, REVERSE CURRENT (AMPS) 10E-3 1.0E-3 TJ = 150C TJ = 100C 10E-6 TJ = 150C TJ = 100C 100E-6 10E-6 1.0E-6 1.0E-6 100E-9 TJ = 25C 10E-9 TJ = 25C 100E-9 10E-9 0 100 200 300 400 VR, REVERSE VOLTAGE (VOLTS) 1.0E-9 0 100 200 300 400 VR, REVERSE VOLTAGE (VOLTS) Figure 3. Typical Reverse Current Figure 4. Maximum Reverse Current dc 2.0 SQUARE WAVE 1.5 Ipk/Io = p Ipk/Io = 5 Ipk/Io = 10 Ipk/Io = 20 FREQ = 20 kHz PFO , AVERAGE POWER DISSIPATION (WATTS) 2.5 I O , AVERAGE FORWARD CURRENT (AMPS) 2.5 dc 2.0 SQUARE WAVE Ipk/Io = p 1.5 Ipk/Io = 10 1.0 Ipk/Io = 20 0.5 0 0 0.5 1.0 1.5 2.0 2.5 IO, AVERAGE FORWARD CURRENT (AMPS) Ipk/Io = 5 1.0 0.5 0 0 20 40 60 80 100 120 140 160 TL, LEAD TEMPERATURE (C) Figure 5. Current Derating Figure 6. Forward Power Dissipation 2 Rectifier Device Data MRS1504T3 100 TJ = 25C C, CAPACITANCE (pF) 10 1.0 0 10 20 30 40 50 60 70 80 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Capacitance R (T) , TRANSIENT THERMAL RESISTANCE (NORMALIZED) 1.0 50% 20% 10% 0.1 5.0% 2.0% 1.0% 0.01 Rtjl(t) = Rtjl*r(t) 0.001 0.00001 0.0001 0.001 0.01 T, TIME (s) 0.1 1.0 10 100 Figure 8. Thermal Response Junction to Lead R (T) , TRANSIENT THERMAL RESISTANCE (NORMALIZED) 1.0 50% 20% 0.1 10% 5.0% 2.0% 0.01 1.0% Rtjl(t) = Rtjl*r(t) 0.001 0.00001 0.0001 0.001 0.01 0.1 T, TIME (s) 1.0 10 100 1,000 Figure 9. Thermal Response Junction to Ambient Rectifier Device Data 3 MRS1504T3 0.089 2.261 0.108 2.743 0.085 2.159 inches mm SMB PACKAGE DIMENSIONS S A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P. D B C INCHES DIM MIN MAX A 0.160 0.180 B 0.130 0.150 C 0.075 0.095 D 0.077 0.083 H 0.0020 0.0060 J 0.006 0.012 K 0.030 0.050 P 0.020 REF S 0.205 0.220 MILLIMETERS MIN MAX 4.06 4.57 3.30 3.81 1.90 2.41 1.96 2.11 0.051 0.152 0.15 0.30 0.76 1.27 0.51 REF 5.21 5.59 K P J H CASE 403A-03 ISSUE B Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 Customer Focus Center: 1-800-521-6274 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 - http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. 81-3-5487-8488 4 Rectifier MRS1504T3/D Device Data |
Price & Availability of MRS1504T3D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |